Envirograf ES/VFR Translucent Top Coat
Envirograf ES/VFR Translucent Top Coat is a spirit based wood stain to apply over Envirograf ES/VFR Clear Fire Protection Coating, suitable for internal or external use.
Product Description
Envirograf ES/VFR Translucent Top Coat is a spirit based wood stain to apply over Envirograf ES/VFR Clear Fire Protection Coating, suitable for internal or external use.
Envirograf ES/VFR Translucent Top Coat is supplied ready for use and does not need thinning.
For internal use apply 1 coat at 10 – 12m² per litre
For external use apply 2 coats at 10 – 12m² per litre
(Ensure end grain is treated with each coat)
Preparation and Application
All surfaces should be clean, dry and free from contamination.
Envirograf ES/VFR Translucent Top Coat is ready for use and does not need thinning. Stir well before application. The result is dependent on the condition of the substrate and temperature of application.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Performance
Envirograf ES VFR Translucent Fire Retardant Varnish is a translucent, spirit-based top coat for the Envirograf ES VFR fire protection system.
Must be used in conjunction with Envirograf ES VFR Clear Primer and ENVIROGRAF ES/VFR CLEAR FIRE PROTECTION COATING to provide Class 0 and Class 1 rating for spread of flames.
Flexible, robust and hard wearing, perfect for a variety of interior and exterior wooden surfaces that require a varnish finish. Dries to a translucent satin finish.
Dries in approximately 2 hours under normal environmental conditions 18℃ to 25℃. Cool, damp or humid conditions may result in extended drying times.
If a second coat is being applied for an exterior surface, ensure that the first coat has fully dried. Apply the second coat and allow to dry for a further 2 hours.
Data Files and Downloads
Popular Categories
