ENVIROGRAF HW SUPERB TOP COAT WHITE
£34.24
excl tax
Envirograf HW Superb Top Coat is an innovative, water based, high sheen, coloured gloss, for use over Envirograf HW01 White Intumescent Coating without the need of an undercoat and also on interior and exterior wood.
Product Description
Envirograf HW Superb Top Coat is an innovative, water based, high sheen, coloured gloss, for use over Envirograf HW01 White Intumescent Coating without the need of an undercoat and also on interior and exterior wood. It looks, feels and applies like a traditional gloss, but is quick drying - reducing application times, has a low odour and contains less atmospheric polluting VOC’s. Suitable for interior and exterior use.
Features & Benefits
High gloss finish, superb appearance
Normally touch dry in 1–2 hours, rooms reusable quickly
Low solvent, low odour
Application
All surfaces to be painted should be clean, dry and free from loose and flaking material. Coverage is approximately 10 -12 square metres per litre. Stir well before use. Easy to apply by brush. Avoid overspreading. Do not apply in temperatures below 10°C or externally when rain is imminent. Apply one coat for internal applications and two coats for external applications.
Touch dry in 1 – 2 hours. Recoatable after 4 – 6 hours.
Clean equipment immediately after use with warm soapy water and rinse thoroughly.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use
Product Performance
Tested on a wide range of wooden doors, achieving 60 minutes integrity and either 30 or 60-minute fire protection and insulation according to BS476 Part22.
Up to 60 minutes fire protection achieved on open joists and floorboards according to BS476 Part 20.
90-minute fire rating achieved on timber mouldings and carcasses according to BS476 Part 20.
Tested on a range of timber types, including plywood and MDF, complying with BS476 Parts 6 & 7, Classes 0 & 1 (Spread of Flame).
Tested to European Standard EN1364-1, achieving 66 minutes integrity.
Complies with Classification B/S1/d0 of European Standard EN13823, single burn test (SBI) and EN11925-2 (ignitability).
Data Files and Downloads
Related Products
Envirograf HW02E system offers a clear, intumescent coating, for upgrading new and certain already c...
£29.05+VAT
Envirograf HW01 White Intumescent Coating provides BS Class 0 & Class 1 as well as 30 and 60 minute ...
£24.53+VAT
A tough long lasting extra hard wearing solvent based top coat that offers a superb robust and easy ...
£32.90+VAT
Popular Categories
